SV110 Series Motion Control Servo Drive
SV110 series servo system is a safe new servo drive system upgraded on the basis of FS100 series servo system in accordance with market demand. The use of advanced control algorithms can achieve accurate digital control of speed and position. Using DSP + CPLD + Intelligent Power Module (IPM) and other latest technology design, single-phase or three-phase AC220V voltage level input, simple operation, high reliability, small size and easy installation. The power covers 400W-3KW, which is suitable for the requirements of various industrial automation motion control equipment.
Applications:
◆ High dynamic response
The bandwidth of the speed loop can reach 300HZ, and the speed change of the sudden load is small
◆ Analog command control
Speed and torque share one analog input, which can be differential or single input, range -10V ~ + 10V
◆ Resonance control
Resonance can be suppressed by adjusting internal parameters. Encoder signal output; the encoder signal is frequency-divided and
output through a line drive
◆ Strong overload capacity
Torque up to three times rated load
◆ Protective function
Over-voltage, over-current, overload, over-speed, and encoder abnormality are fully prepared for error detection and recognition, which
improves the system’s safety performance
◆ Speed range
◆ Maximum speed up to 5000rpm and minimum speed 0.1rpm
◆ Position control mode
High-speed optocoupler isolated Plus / signal CCW / CW, PLUS number and A / Bphase, PLUS signal position control adopts differential
or single-ended pulse receiving mode, which can effectively suppress interference. Carry out smoothly during deceleration, increase the
digital filtering and detection method of pulse signal
◆ Input and output terminals
The input and output terminals are optocoupler isolated and the function is programmable. The input terminals can realize functions
such as servo enable, alarm clearing, torque limit and emergency stop. The output terminals can realize indication functions such as
alarm, positioning completion and speed arrival, making the operation process more normalized. In addition, the input interface can be
controlled by switches, relays and open collector transistors. The output uses Darlington photocouplers, which can be connected to
relays and photocouplers. The interface is more convenient to use.
◆ System composition characteristics: Application of FS110 series servo
◆ Basically use touch screen + PLC or customized host controller as the control system
The serve system accepts the speed or position signal of the host computer to follow or shift the speed
Servo system with high precision and resolution of 0.01mm
The servo system has a fast response speed, adapts to the frequent acceleration and deceleration equipment application and simple
debugging